ABOUT US
A family business where tradition meets innovation
Ligni Linea's journey began as a small family business, so it is especially good for us to see how today we are becoming increasingly recognized in Lithuania for the exceptional quality and reliability of our wood finishing products.
From the first steps, we have constantly delved into the secrets of wood, grown together with the team and invested in modern technologies and production improvements. We process wood, a traditional finishing material, using innovations to meet today's needs and delight every customer.
We believe in what we do and are confident in the quality of each of our products –
therefore, we boldly guarantee them on our own behalf.
ABOUT PRODUCTION
With respect for the tree and the customer
We value wood for its long history, which is why we create each finishing product ourselves – from raw material selection to final finishing. This way we ensure impeccable quality and fulfill the promise we made to ourselves and our customers. Our goal is to be more than a supplier. We strive to become a reliable partner who not only offers a product, but also helps find a solution, inspires trust and builds long-term relationships.
With respect for wood and the customer
We are surrounded by uniqueness. Every tree is unique, every board we cut from it, every board we select and prepare for production, and every project in which our wood finishes are installed is unique.
With respect for wood, we highlight the wood pattern, create a picture of dancing branches, and extend the life of the boards.
We treat our customers with respect, communicate sincerely, and build relationships. We not only help you find the most suitable wood finishing solutions, but also provide advice on how to install them.
Family business values
Family business values
Trees grow for about 80 years before they are used for human needs, so the mission of our family business is to make the most of wood and respect it. We cannot and do not respect the wood that goes into production.
We take care of you as if you were our own children. We are a family business, so we are responsible for everything on our own behalf. We can produce not only large quantities but also form orders in small batches, which is disadvantageous for companies that carry out linear production.
Wood decoration with heart
Producing heat-filled wood finishing solutions means more than just business to us.
This is our lifestyle, leisure and passion. The highest quality of production and happy customers, as well as constant innovations, thanks to which we can offer ever new and interesting wood finishing solutions.
We are proud of our work because we see how much joy it brings to the customers who choose our products.
Manufacturing that Europe trusts
We started our business with round log cutting, construction timber. We currently specialize in the production of decorative wood. Siding, painted siding, burnt wood siding and terrace boards. Our wood finishing solutions are widely used not only in Lithuania, but also in Scandinavian countries, UK, Ireland, Belgium, Denmark, etc.
Production volumes currently reach 10,000 m2/month. In order to maintain optimal production deadlines, we maintain over 20,000 m2 of raw materials in our warehouse.
Production process
Select the step you are interested in and read more
Raw material selection
Planing
Burning
Combing
Lubrication
Packing
Warranty and service
Raw material selection
The journey of each of our products begins with carefully selected raw materials. We work only with reliable and selected wood suppliers from northern regions such as Finland and Sweden. It is in these places that spruce trees are distinguished by their strength and durability.
We have the following requirements for raw materials:
- Small, only living branches.
- The dimensions of the workpieces are maintained.
- Humidity 16% (±2%).
- Proper drying, which ensures that there are no split ends or kinks (curves).
Each billet is carefully inspected to meet extremely strict moisture and dimensional standards. Care at this stage is critical, as it is impossible to produce a product from a poor-quality billet. extra (highest) quality wood finishing products
(We do not produce B, C or lower quality products).
Planing
During planing, the board acquires its final profile. By flexibly using various profiling knives, we can give the wood finish a wide variety of shapes: both standard and according to individual customer needs: vertical, horizontal, rhombus, square. Various widths and thicknesses are available.
At this stage of wood finishing production, accuracy is extremely important so that there are no gaps when installing the boards and the surface is aesthetic. Experienced craftsmen see and adapt to each board. We feel the wood: which side to place the board on, at what speed to let go. The work performed in this way ensures minimal production defects. No damage, scratches or waves.
The result of the production process: Structural timber or sawn boards ready for further processing.
Burning
The real magic of transformation occurs during wood burning. The wood blanks coming from the planing process are burned to a 2 mm surface char using special equipment.
This literally heat-infusing process gives wood finishing solutions resistance to environmental influences and durability. Properly performed burning process highlights the natural beauty of the wood, protects against moisture accumulation and pests.
The moisture level of the wood is carefully assessed during the burning process. This ensures an even burning of the surface, preserving the aesthetic appearance and creating appropriate protective properties for the burned wood facade.
Combing
After burning, the process boards are scrubbed and combed. The unstable layer of carbon formed during burning is mechanically removed and the natural wood grain is highlighted.
This process further strengthens the surface of the wood facade cladding and properly prepares it for the next stages of production.
During combing, it is important to thoroughly scrub the surface of the boards so that the oil can properly absorb into the wood during oiling and provide maximum long-term protection from environmental (atmosphere, UV rays) effects and ensure a wonderful aesthetic appearance.
We comb with extreme precision: neither too much nor too little. Just enough to ensure a durable surface for burnt wood facades and maximum protection from the elements.
Lubrication
Oiling, which is carried out twice, is one of the final stages of production, during which the color of the wooden facade is given and protection from environmental influences is ensured.
We use a special oil with biocides, which additionally protects wooden facades from woodworm, mold, fungus, moss and provides real durability. We choose this product because we have conducted environmental resistance tests and know that light colors will last 5 years, dark colors 7-10 years.
To achieve maximum protection and a beautiful appearance, we always oil in two layers. This type of oiling ensures the greatest resistance of wooden facades to the environment and UV rays, and gives the appearance of a wooden facade a warm look and feel.
The result of the production process: Burnt and finished wood ready for packaging.
Packing
The finished wood finishing products are packaged in a special film that provides additional protection against UV rays.
This is extremely important so that the boards retain their color and unchanged quality during transportation and storage at the construction site.
Yes, out of respect for the wood and the work we do, even the packaging of the manufactured wood facade boards is thoughtful.
Warranty and service
We are confident in the quality of our wooden facades, which is why we provide a 10-year warranty. Impeccable quality, durability, and the natural warmth of wood have accompanied our customers all these years.
In order to ensure long and enjoyable use of the wooden facade, we provide written installation instructions. For example, to protect the wooden facade from local oxidation, we recommend attaching it to a ventilated facade, and using stainless steel screws or special stainless steel nails of at least 1,6 mm for the attachment itself.
QUALITY GUARANTEE
Get in touch
Want to know more about options, production or prices?
Call or write to us
Send us a message
Orders and consultation
About us
Ligni Linea, UAB
Company code 304294470
VAT payer code: LT100010275113
Bank account: AB Luminor Bankas
Address: Skrebinų St. 16, Batėgala village, Jonava district
Working hours
Production department:
Thursday 7 am – 16 pm
VI-VII – closed
Sales department:
Thursday 8 am – 17 pm
VI-VII – closed